youtube

5G Beam Selection Made Simple: CSI-RS, PMI & UE Capability Explained

Mohamed ELAdawi

28 Jul 2025

In this video, we simplify how 5G gNB selects the optimal beam for each UE using CSI feedback. We walk through the complete flow — from CSI-RS measurement and UE feedback (PMI, CQI, RI) to beamforming implementation — and explain key RRC configurations and UE capability checks from the 3GPP standards. good for engineers seeking a practical understanding of CSI-based beam management.

Free Complete Training Playlist on 5G Massive MIMO:

https://www.youtube.com/playlist?list=PLhH4YVQM9NdzPeooh2mpyCgAA3Ox_Y5ZO

5G HARQ Explained: Soft Combining, HARQ Processes, ACK/NACK Timing, Codebook Types, Spatial Bundling, and 4G vs 5G Differences (Article)

Introduction * HARQ is one of the most important reliability mechanisms in the 5G MAC layer. It directly affects retransmission speed, uplink control overhead, latency, and overall scheduling efficiency. * In simple words, HARQ gives 5G a fast retransmission loop. It helps recover transmission errors much faster than higher-layer recovery, which is

5G SSB Explained: Cell Search, Frequency Positioning, Beam Sweeping, and Overhead - Article

Introduction The Synchronization Signal Block, or SSB, is one of the first NR signals a UE must detect before it can access a 5G cell. It is the entry point for synchronization, cell identification, essential broadcast information, and beam-based initial access. If the UE cannot find and decode SSB correctly,

5G Massive MIMO Fundamentals: Passive vs Active Antenna, MIMO Gains, and Antenna Specifications and Structure - Article

Introduction 5G Massive MIMO is one of the most important topics to understand before going deeper into NR beamforming, beam management, CSI-RS, SRS, layers, ports, and MU-MIMO. This article explains why Massive MIMO is different from traditional MIMO, how the antenna structure changes, where the main gains come from, and

LTE Foundation, PLMN, MIB/SIB1, Cell Selection & Reselection | 4G E2E Signaling Session 1 (Video)

Hi All, Session 1 of the 4G E2E Signaling Course is now available on YouTube. In this session, we build the essential LTE foundation concepts needed before going into detailed end-to-end signaling procedures such as attach, bearer setup, handover, and service request. This video explains how the UE in LTE/

Read more

5G HARQ Explained: Soft Combining, HARQ Processes, ACK/NACK Timing, Codebook Types, Spatial Bundling, and 4G vs 5G Differences (Article)

5G SSB Explained: Cell Search, Frequency Positioning, Beam Sweeping, and Overhead - Article

5G Massive MIMO Fundamentals: Passive vs Active Antenna, MIMO Gains, and Antenna Specifications and Structure - Article

LTE Foundation, PLMN, MIB/SIB1, Cell Selection & Reselection | 4G E2E Signaling Session 1 (Video)