youtube

5G Beamforming Types- Eigen based Vs Grid of beams

Mohamed ELAdawi

24 Jul 2025

This video covers a high-level view about 5G Beamforming types:

Eigen-Based Beamforming (EBB): Dynamically updates beamforming weights to track UE movement. Suitable for TDD, leveraging channel reciprocity and SRS-based uplink measurements to derive downlink weights. Requires high baseband processing to track UEs in real-time.
Grid of Beams (GoB): Uses a fixed set of beam positions, switching between predefined beams based on UE feedback. Suitable for both FDD and TDD, requiring less baseband processing than EBB.

5G HARQ Explained: Soft Combining, HARQ Processes, ACK/NACK Timing, Codebook Types, Spatial Bundling, and 4G vs 5G Differences (Article)

Introduction * HARQ is one of the most important reliability mechanisms in the 5G MAC layer. It directly affects retransmission speed, uplink control overhead, latency, and overall scheduling efficiency. * In simple words, HARQ gives 5G a fast retransmission loop. It helps recover transmission errors much faster than higher-layer recovery, which is

5G SSB Explained: Cell Search, Frequency Positioning, Beam Sweeping, and Overhead - Article

Introduction The Synchronization Signal Block, or SSB, is one of the first NR signals a UE must detect before it can access a 5G cell. It is the entry point for synchronization, cell identification, essential broadcast information, and beam-based initial access. If the UE cannot find and decode SSB correctly,

5G Massive MIMO Fundamentals: Passive vs Active Antenna, MIMO Gains, and Antenna Specifications and Structure - Article

Introduction 5G Massive MIMO is one of the most important topics to understand before going deeper into NR beamforming, beam management, CSI-RS, SRS, layers, ports, and MU-MIMO. This article explains why Massive MIMO is different from traditional MIMO, how the antenna structure changes, where the main gains come from, and

LTE Foundation, PLMN, MIB/SIB1, Cell Selection & Reselection | 4G E2E Signaling Session 1 (Video)

Hi All, Session 1 of the 4G E2E Signaling Course is now available on YouTube. In this session, we build the essential LTE foundation concepts needed before going into detailed end-to-end signaling procedures such as attach, bearer setup, handover, and service request. This video explains how the UE in LTE/

Read more

5G HARQ Explained: Soft Combining, HARQ Processes, ACK/NACK Timing, Codebook Types, Spatial Bundling, and 4G vs 5G Differences (Article)

5G SSB Explained: Cell Search, Frequency Positioning, Beam Sweeping, and Overhead - Article

5G Massive MIMO Fundamentals: Passive vs Active Antenna, MIMO Gains, and Antenna Specifications and Structure - Article

LTE Foundation, PLMN, MIB/SIB1, Cell Selection & Reselection | 4G E2E Signaling Session 1 (Video)