In this video, we explain VoLTE call procedures in 4G LTE. You will see how attach and registration work, how IMS APN and QCI5 activation are done, and how UE and EPC capabilities can be checked from logs. A clear step-by-step view of VoLTE call setup and signaling.
#VoLTE #4G #VoNR
Session #6 of our FREE 4G/LTE Fundamentals & End-to-End Signaling training is now available on YouTube! "English Speaker" In this session, we continue with Part 2 of the 4G LTE Attach Procedure, focusing on: * End-to-end signaling flow * Detailed explanation of signaling messages and
في الحلقة دي من سلسلة 5G بالعربي، هنبدأ Deep Dive عملي ومفصل في 5G NR Synchronization Signal Block (SSB)، من الـ fundamentals لحد الـ practical impact على coverage, accessibility, beam management and optimization. هنبدأ الأول بفهم الفرق بين 4G and 5G Synchronization Signals، وإزاي طريقة إرسال الـ synchronization signals اتغيرت
Session 5 of my 4G/LTE E2E Signaling series is out: the LTE Attach Procedure. Attach is the first thing a phone does on an LTE network. It registers, gets authenticated, receives an IP address and sets up the Default EPS Bearer. In this session: → Attach Functions & Triggering Conditions
Overview The Random Access procedure can be initiated in different situations depending on whether the network already knows the UE and whether dedicated resources can be assigned. Random Access Channel, or RACH, is used whenever the UE needs to establish or recover uplink synchronization with the network. In 5G, Random
Mohamed ELAdawi
Telecom Expert | 5G & 6G Trainer
