youtube

PDSCH & PDCCH Beamforming Deep dive- 5G Massive MIMO Session 4

Welcome to Session 4 of the 5G Massive MIMO Training Series. The following is covered in this video:

Introduction/Contents
PDSCH Beamforming based on SRS
SRS Antenna switching
Tacking UE SRS Limited Power: SRS Frequency Hopping
SRS Capacity improvement solution

Free Video

Paid Material

This topic is also available as a paid PDF material.

Title: 5G MM Training - 5G PDSCH & PDCCH Beamforming
Price: €5.00

Paid PDF material covering PDSCH and PDCCH beamforming concepts in 5G Massive MIMO training.

Status: Checkout link will be activated soon.

For support and policies:

5G NR SSB Deep Dive: Cell Search, Beam Sweeping, Power & Optimization | بالعربي

في الحلقة دي من سلسلة 5G بالعربي، هنبدأ Deep Dive عملي ومفصل في 5G NR Synchronization Signal Block (SSB)، من الـ fundamentals لحد الـ practical impact على coverage, accessibility, beam management and optimization. هنبدأ الأول بفهم الفرق بين 4G and 5G Synchronization Signals، وإزاي طريقة إرسال الـ synchronization signals اتغيرت

LTE Attach Procedure | E2E Call Flow, MME, EPS Bearer & Default Bearer | 4G E2E Signaling Session 5

Session 5 of my 4G/LTE E2E Signaling series is out: the LTE Attach Procedure. Attach is the first thing a phone does on an LTE network. It registers, gets authenticated, receives an IP address and sets up the Default EPS Bearer. In this session: → Attach Functions & Triggering Conditions

RACH CBRA/CFRA Call Flow and Use Cases

Overview The Random Access procedure can be initiated in different situations depending on whether the network already knows the UE and whether dedicated resources can be assigned. Random Access Channel, or RACH, is used whenever the UE needs to establish or recover uplink synchronization with the network. In 5G, Random

4G LTE Cell Selection Explained: Initial Selection, Stored Information and Cell Selection Criteria

Introduction After the UE completes system information acquisition, the next step is to determine whether the detected cell is suitable for camping. This process is called cell selection. During cell selection, the UE checks the available LTE cells and evaluates whether a cell satisfies the required coverage, quality, and access

Mohamed ELAdawi Telecom Expert | 5G & 6G Trainer