This video covers Session 4 of the E2E VoLTE Training Campaign. In this session, you will go through the following:
- E2E VoLTE signaling procedures for the Mobile Terminated (MT) call flow
- 4G Paging
- An explanation of what the ECM states mean
Note: Material Sources will be added at the end of the full training
Session #6 of our FREE 4G/LTE Fundamentals & End-to-End Signaling training is now available on YouTube! "English Speaker" In this session, we continue with Part 2 of the 4G LTE Attach Procedure, focusing on: * End-to-end signaling flow * Detailed explanation of signaling messages and
في الحلقة دي من سلسلة 5G بالعربي، هنبدأ Deep Dive عملي ومفصل في 5G NR Synchronization Signal Block (SSB)، من الـ fundamentals لحد الـ practical impact على coverage, accessibility, beam management and optimization. هنبدأ الأول بفهم الفرق بين 4G and 5G Synchronization Signals، وإزاي طريقة إرسال الـ synchronization signals اتغيرت
Session 5 of my 4G/LTE E2E Signaling series is out: the LTE Attach Procedure. Attach is the first thing a phone does on an LTE network. It registers, gets authenticated, receives an IP address and sets up the Default EPS Bearer. In this session: → Attach Functions & Triggering Conditions
Overview The Random Access procedure can be initiated in different situations depending on whether the network already knows the UE and whether dedicated resources can be assigned. Random Access Channel, or RACH, is used whenever the UE needs to establish or recover uplink synchronization with the network. In 5G, Random
Mohamed ELAdawi
Telecom Expert | 5G & 6G Trainer
