youtube

Mastering 5G NSA Mobility: E2E Call Flows & Troubleshooting(NSA Serie#3)

In this Video, we`ll break down the essentials understanding of 5G NSA Mobility, exploring E2E Call Flow using traces and Logs and we will address all the common handover issues. The following will be covered in this video:

1- 5G NSA ENDC Network Architecture And Mobility Overview
2- How to check EN-DC UEs Capability for NSA Handover
3- Exploring E2E Call Flow from Traces and Logs
4- Mobility Related Parameters and Common HO Failures

Study sources:
- https://ourtechplanet.com/5g-call-flows-session-2-5g-intra-gnb-inter-gnb-mobility-overview/
- 3GPP 37.340 & 36.423.
- 3GPP TS 37.340(ENDC)
- 3GPP TS 38.306
- 3GPP 36.413 (LTE Signaling)
- 3GPP 38.424 (X2AP)

4G LTE Attach Procedure Explained Step by Step: Part 2

Session #6 of our FREE 4G/LTE Fundamentals & End-to-End Signaling training is now available on YouTube! "English Speaker" In this session, we continue with Part 2 of the 4G LTE Attach Procedure, focusing on: * End-to-end signaling flow * Detailed explanation of signaling messages and

5G NR SSB Deep Dive: Cell Search, Beam Sweeping, Power & Optimization | بالعربي

في الحلقة دي من سلسلة 5G بالعربي، هنبدأ Deep Dive عملي ومفصل في 5G NR Synchronization Signal Block (SSB)، من الـ fundamentals لحد الـ practical impact على coverage, accessibility, beam management and optimization. هنبدأ الأول بفهم الفرق بين 4G and 5G Synchronization Signals، وإزاي طريقة إرسال الـ synchronization signals اتغيرت

LTE Attach Procedure | E2E Call Flow, MME, EPS Bearer & Default Bearer | 4G E2E Signaling Session 5

Session 5 of my 4G/LTE E2E Signaling series is out: the LTE Attach Procedure. Attach is the first thing a phone does on an LTE network. It registers, gets authenticated, receives an IP address and sets up the Default EPS Bearer. In this session: → Attach Functions & Triggering Conditions

RACH CBRA/CFRA Call Flow and Use Cases

Overview The Random Access procedure can be initiated in different situations depending on whether the network already knows the UE and whether dedicated resources can be assigned. Random Access Channel, or RACH, is used whenever the UE needs to establish or recover uplink synchronization with the network. In 5G, Random

Mohamed ELAdawi Telecom Expert | 5G & 6G Trainer

Read more

4G LTE Attach Procedure Explained Step by Step: Part 2

5G NR SSB Deep Dive: Cell Search, Beam Sweeping, Power & Optimization | بالعربي

LTE Attach Procedure | E2E Call Flow, MME, EPS Bearer & Default Bearer | 4G E2E Signaling Session 5

RACH CBRA/CFRA Call Flow and Use Cases