youtube

Mastering 5G NSA Planning: Detailed insights into 5G NR Slot Format(NSA Series#4)

This Video covers detailed insights into NR Slot Format, including explanations on NR-TDD Co-Existence, Dynamic TDD, Cross-Link interference and impact on NR Slot Format planning on Latency, DL/UL Speed and SSB Coverage.

References:
5G NR in Bullets
5G NR the next generation wireless access technology
https://sharetechnote.com/html/5G/5G_tdd_UL_DL_configurationCommon.html
https://sharetechnote.com/html/5G/5G_FrameStructure.html#Slot_Format
Slot-format Indicator – NR LTE related tech oriented blog (info-nrlte.com)
3GPP TS 38.306 Throughput calculation
3GPP TS 38.213
3GPP TS 36.211

5G NR SSB Deep Dive: Cell Search, Beam Sweeping, Power & Optimization | بالعربي

في الحلقة دي من سلسلة 5G بالعربي، هنبدأ Deep Dive عملي ومفصل في 5G NR Synchronization Signal Block (SSB)، من الـ fundamentals لحد الـ practical impact على coverage, accessibility, beam management and optimization. هنبدأ الأول بفهم الفرق بين 4G and 5G Synchronization Signals، وإزاي طريقة إرسال الـ synchronization signals اتغيرت

LTE Attach Procedure | E2E Call Flow, MME, EPS Bearer & Default Bearer | 4G E2E Signaling Session 5

Session 5 of my 4G/LTE E2E Signaling series is out: the LTE Attach Procedure. Attach is the first thing a phone does on an LTE network. It registers, gets authenticated, receives an IP address and sets up the Default EPS Bearer. In this session: → Attach Functions & Triggering Conditions

RACH CBRA/CFRA Call Flow and Use Cases

Overview The Random Access procedure can be initiated in different situations depending on whether the network already knows the UE and whether dedicated resources can be assigned. Random Access Channel, or RACH, is used whenever the UE needs to establish or recover uplink synchronization with the network. In 5G, Random

4G LTE Cell Selection Explained: Initial Selection, Stored Information and Cell Selection Criteria

Introduction After the UE completes system information acquisition, the next step is to determine whether the detected cell is suitable for camping. This process is called cell selection. During cell selection, the UE checks the available LTE cells and evaluates whether a cell satisfies the required coverage, quality, and access

Mohamed ELAdawi Telecom Expert | 5G & 6G Trainer

Read more

5G NR SSB Deep Dive: Cell Search, Beam Sweeping, Power & Optimization | بالعربي

LTE Attach Procedure | E2E Call Flow, MME, EPS Bearer & Default Bearer | 4G E2E Signaling Session 5

RACH CBRA/CFRA Call Flow and Use Cases

4G LTE Cell Selection Explained: Initial Selection, Stored Information and Cell Selection Criteria