youtube

Power BI Calculation Group: Time intelligence (Automated Delta%)

This video addresses a common limitation in Power BI, where redundant measures were required to calculate the Delta% for Pre/Post date values of specific metrics or KPIs. In this video, we’ll show you how to streamline this process using Calculation Groups. Here's what you'll learn:

Automating Delta% Calculations with Calculation Groups
Applying Conditional Formatting to Calculation Groups
- Format String for % = #,##0.00%
how to disable Discarded Implicit Measures

You can find part of the materials used at the below link:

RACH CBRA/CFRA Call Flow and Use Cases

Overview The Random Access procedure can be initiated in different situations depending on whether the network already knows the UE and whether dedicated resources can be assigned. Random Access Channel, or RACH, is used whenever the UE needs to establish or recover uplink synchronization with the network. In 5G, Random

4G LTE Cell Selection Explained: Initial Selection, Stored Information and Cell Selection Criteria

Introduction After the UE completes system information acquisition, the next step is to determine whether the detected cell is suitable for camping. This process is called cell selection. During cell selection, the UE checks the available LTE cells and evaluates whether a cell satisfies the required coverage, quality, and access

5G PDCCH Optimization Approach: Understand DCI Applications, CSS vs USS and What Is Consuming PDCCH Resources

Introduction When PDCCH utilization becomes high, the first question should not immediately be: Which PDCCH optimization feature should I enable? A better starting point is to understand what the PDCCH resources are actually being used for. PDCCH is involved in different procedures such as SIB1 transmission, Other System Information, Random

5G NSA SgNB Addition: Key Timers Impacting the Success Rate

During SgNB Addition, there are three important timers that can directly affect the SgNB Addition Success Rate. The figure below shows where each timer starts and stops within the call flow. SgNB Addition Call Flow and Related Timers After the B1 Measurement Report is received, the MeNB starts the SgNB

Mohamed ELAdawi Telecom Expert | 5G & 6G Trainer

Read more

RACH CBRA/CFRA Call Flow and Use Cases

4G LTE Cell Selection Explained: Initial Selection, Stored Information and Cell Selection Criteria

5G PDCCH Optimization Approach: Understand DCI Applications, CSS vs USS and What Is Consuming PDCCH Resources

5G NSA SgNB Addition: Key Timers Impacting the Success Rate